There are three main types of common automatic door openers: slide rail automatic door openers, underground automatic door openers and push rod automatic door openers.
The slide rail automatic door opener is usually used in conjunction with the slide rail system. The motor drives the slider on the slide rail to move the door body. It is suitable for large sliding doors or suspended doors. It opens smoothly and has low noise.
The underground automatic door opener is installed under the door hinge and will not damage the door body and the surrounding environment. It is divided into hydraulic type and electromechanical type and is widely used.
The push rod automatic door opener is wall-mounted with an opening angle of 105 degrees. The electromechanical type is suitable for doors with moderate opening frequency and a single door width of less than 5 meters, while the hydraulic type is suitable for doors with high opening frequency and a single door width of less than 7 meters.
What Are The Three Common Types Of Automatic Door Openers?
Popular Products
Heavy Duty Commercial Gate Openers
Oil-bath motor and non-oil-bath motor, Oil-bath motor, having the function of waterproof and cooling properties,
Electric Sliding Gate Motor
There is a protection for the gear, it is more safe.. Drive setup is made up of turbine and worm, working placidly..
Heavy Industrial Gate Opener
This is oil-bath motor with cooling fan in side.. Thermal protection built-in motor winding.. Bronze worm gear work
24v Gate Opener
1. Single-leaf or double-leaf opening: The function can be activated by pressing button.. 2. Controller locking: To
Swing Folding Gate Operator
Power failure happens, release the gate opener and enables manual opening and closing.. Micro limited switch..
Swing Auto Gate System
Drived by thread pole.. Mechanical limit switch.. Outside control box.. Can chose one or two gates to open or close.