Specification
|
Item No. |
Output torque |
Rate speed |
Maximum number of output shaft revolutions |
Maximum weight of the door leaf. |
Voltage |
Power |
Gearbox Ratio |
Protection class |
Maximum time of continuous operation |
|
IN-I |
35N.m |
31RPM |
17 revolutiongs |
180KG |
AC110V-AC220V/50Hz-60Hz |
750W |
48:1 |
IP65 |
10 min |
|
IN-II |
50N.m |
24RPM |
17 revolutiongs |
260KG |
AC110V-AC220V/50Hz-60Hz |
670W |
58:1 |
IP65 |
10 min |
|
IN-III |
50N.m |
24RPM |
17 revolutiongs |
260KG |
AC110V-AC220V/50Hz-60Hz |
610W |
58:1 |
IP65 |
15 min |
|
IN-IV |
100N.m |
24RPM |
17 revolutiongs |
500KG |
AC380V/50Hz |
1000W |
58:1 |
IP65 |
15 min |
|
IN-V |
130N.m |
18RPM |
17 revolutiongs |
650KG |
AC380V/50Hz |
1000W |
80:1 |
IP65 |
15 min |
Features
- This door opener is used for big workplant or warehouse.
- Advanced design of limited switch adjusting for accurate adjustment.
- Lower noise, high IP class.
- Easy installation. In case of power failure, the gate can be opened and closed manually after release clutch.
- The door opener is equipped with an overheat protection device.
- Door opening machine with advanced grease, maintenance free.
Advantages
Multiple models can be selected to adapt to different voltages.
The amount of weight that can be carried varies.
High level of protection, not easy to damage, can adapt to different pressure conditions.
New appearance, compared with the original more beautiful and atmospheric.
To install the drive on the door shaft, do the following:
- Unlock the drive.
- Mounting bracket 2 can be mounted on the left or right side of the drive.
- Connect with screw 1 according to the selected working position, with mounting washer bracket 2 to drive 5, without tightening the screw.
- Attach the mounting bracket to the base, attach the drive unit 5 to the 3 door shafts (wall or metal structure), and you decide to install the drive to mark the location of the mounting bracket fastening hole.
- Remove the drive from the door axle and perform the necessary installation work to secure the mounting bracket to the base.
- Install a stop ring 4 on shaft 3.
- Insert driver 5 on shaft 3 Install the required flat key 6 on shaft 3.
- Fasten mounting bracket 2 to the base and tighten all screws 1.
- Install another lock ring 4 on the door shaft 3. The two lock rings 4 are tightly mounted on both sides of the drive and secured with screws.
An Overview of Industrial Door Opener Remote Control Technology
The electric opening and closing of industrial doors via remote control devices is known as remote control technology for industrial door openers. This technology, which can increase safety, lower labor expenses, and improve job productivity, is commonly utilized in parking lots, warehouses, and factories. The main elements and technological characteristics of industrial door opener remote control technology are as follows.
The Remote Control Device's Structure
The following components make up the industrial door opener remote control device:
- Electronic buttons and components are housed in the controller casing.
- The back cover protects internal components by working with the controller housing.
- The control gadget is operated by the button hole.
- The card slot and plug block make it easier to quickly disassemble and reassemble the controller housing and back cover.
- To reset and guarantee a tight fit between the controller housing and the rear cover, the first spring is utilized to push the plug block.
- The connector, which is used to mount the controller to the wall or another surface, comes with a card block and support.
- Block and protective cover are examples of protective elements that are used to keep the buttons safe.
- An elastic rope makes it easy to carry the controller.
- Protective and sealing pads increase the device's durability and sealing.
The Remote Control's Operation
Wireless transmission is the primary method used in remote control technologies. Typical protocols for wireless communication include:
TCP/IP
Suitable for both local area networks (LAN) and wide area networks (WAN), this protocol allows remote control via the Internet.
01
UDP
Suitable for remote control between several intranets, UDP uses the hole punching principle (UDPHolePunching technology) to enter the intranet.
02
Wi-Fi
Short-range remote control via wireless local area network.
03
Bluetooth
Ideal for short-range, low-power device control.
04
Zigbee
Fits well with IoT devices that have modest power and data rates.
05
Use Cases
The following situations make industrial door opener remote control technology popular:
Warehouses And Factories
Increase the efficiency of logistics by implementing automatic gate control.
Parking Lots
Reduce manual involvement by implementing automated vehicle entrance and exit management.
Office Buildings
Implement remote door control to increase convenience and safety.
Smart Home
Home doors can be remotely controlled when smart door locks are used in conjunction with them.
Benefits Of Technology
High Efficiency
Lower labor expenses while increasing productivity.
Security
The transmission of the control instructions is guaranteed to be secure through the use of several verification methods and encrypted communication.
Flexibility
Adapt to various conditions by supporting a variety of communication protocols.
Reliability
In unusual circumstances, including power outages, regular operation is guaranteed by a backup power source and redundant architecture.
Trends In Future Development
Intelligence
To accomplish predictive maintenance and intelligent door control management, integrate big data technologies with artificial intelligence.
Integration
To create a single intelligent management system, integrate with other intelligent systems and devices.
Standardization
Encourage the creation of industry standards and enhance product compatibility and interoperability.
In Conclusion
Through sophisticated wireless communication and control devices, industrial door opener remote control technology enables effective, secure, and adaptable remote control of industrial doors. Future industrial door opener remote controls will be increasingly sophisticated and integrated due to ongoing technological advancements, offering users more dependable and convenient options.
Hot Tags: industrial variable speed swing gate operator, China industrial variable speed swing gate operator manufacturers, suppliers, factory, The New Sliding Gate Opener, Automatic Road Barrier System, Sliding Gate with Remote Control, Electric Sliding Gate Openers, Sliding Gate for Front Porch, Automatic Gate Opener for Sliding Gates
