Description

Send Inquiry

Specification

Item No.	Voltage	Output torque	Max gate weight	Motor speed	Gate speed	Limit switch	Noise	Temperature	Protection class	Certification
D-500A	AC 230V 50Hz (AC 120V 60Hz)	12N·m	500KG	1400r/min	12m/min	Magnetic (NC/NO)	≤56dB	-45℃-+65℃	IP44	CCC, CE
D-800A	AC 230V 50Hz (AC 120V 60Hz)	22N·m	800KG	1400r/min	12m/min	Magnetic (NC/NO)	≤56dB	-45℃-+65℃	IP44	CCC, CE
D-1000A	AC 230V 50Hz (AC 120V 60Hz)	27N·m	1000KG	1400r/min	12m/min	Magnetic (NC/NO)	≤56dB	-45℃-+65℃	IP44	CCC, CE
DO-1000A	AC 230V 50Hz (AC 120V 60Hz)	27N·m	1000KG	1400r/min	12m/min	Magnetic (NC/NO)	≤56dB	-45℃-+65℃	IP44	CCC, CE
DO-1200A	AC 230V 50Hz (AC 120V 60Hz)	35N·m	1200KG	1400r/min	12m/min	Magnetic (NC/NO)	≤56dB	-45℃-+65℃	IP44	CCC, CE
DO-1500A	AC 380V	38N·m	1500KG	1400r/min	12m/min	Magnetic (NC/NO)	≤56dB	-45℃-+65℃	IP44	CCC, CE
DO-2000A	AC 230V 50Hz (AC 120V 60Hz)	45N·m	2000KG	1400r/min	12m/min	Magnetic (NC/NO)	≤56dB	-45℃-+65℃	IP44	CCC, CE
D-800A-BL	DC 24V	/	800KG	2200r/min	14m/min	Magnetic (NC/NO)	≤56dB	-45℃-+65℃	IP44	CCC, CE

Characteristic

Thermal protection built in motor winding.
There is a protection for the gear, it is more safe.
Drive setup is made up of turbine and worm, working placidly.
Have a good self-hold performance, gate locks after running.
It can be used on 380V/230V/120V/24V.
Low noise, not more then 56dB when we use nylon Worm gear.
Speed Recording Motor, a ccurate positioning.
Customized dutch, easy to open and dose without stuck.
Waterproof motor with long running time.

Advantages

A range of hues are available, including red, silver, black, and white.
Several bases of the machine shell are die-cast from aluminum alloy, which is tightly sealed and impervious to rot and corrosion.
Uses a high-power copper wire motor that is steady, powerful, and shouldn't heat up.
Round form, nice texture.
Distinct form
Strong resistance to pressure, difficult to break.
High capacity to support loads

Features Of The Product

Electric sliding door openers are an essential component of contemporary structures that enhance overall safety and aesthetics in addition to building convenience. The features and upkeep procedures of electric sliding door openers will be thoroughly covered in this article.

Organization and Operation

Key parts such motors, controllers, slide rails, door bodies, and travel switches often make up electric sliding door openers. The motor is a driving mechanism. It moves the door body by driving the slider on the slide rail after getting a signal from the controller. The door body opens and closes silently and smoothly thanks to the sliding rail mechanism. To guarantee the accuracy of the door body, the travel switch is employed to precisely locate the opening and shutting positions of the door body.

A variety of Application Scenarios

Large public buildings like malls, office buildings, hospitals, and airports are among the many settings where electric sliding door openers are appropriate. Due to its excellent efficiency and dependability, electric sliding door openers have emerged as the go-to automated door control solution, particularly in locations where doors must be opened and closed regularly.

Quiet and Smooth

To move the door body, the electric sliding door opener with a slide rail moves the slider on the slide rail. The door body opens and closes smoothly and silently thanks to its design. The electric sliding door opener with a slide rail is quieter when operating than other kinds of door openers, giving customers a more pleasant.

Excellent Security

Numerous safety prevention features, including an anti-pinch design and a rebound function in the event of an obstruction, are built into the electric sliding door opener. To save individuals from being pinched, the door body will automatically halt and bounce back when it comes into contact with an obstruction during closing. Furthermore, exact opening and shutting positions of the door body are guaranteed by the precise control of the travel switch, preventing safety risks brought on by imprecise positions.

Sensible Management

Intelligent control, including remote control via remote controls, mobile applications, etc., is typically supported by modern electric sliding door openers. To achieve more flexible and convenient door control management, users can adjust factors such the door body's speed and opening and closing times based on their actual demands.

Upkeep

Regular maintenance is necessary to prolong the electric sliding door opener's service life and preserve its functionality because it is an automated device that is operated for a long time. The primary procedures and safety measures for maintaining an electronic sliding door opener are as follows:

Frequent Cleaning

Clean the electric sliding door opener's many parts on a regular basis, paying particular attention to the motor, slide rail, and door body. To prevent harming the equipment's surface or internal components, clean it with a gentle cloth and a moderate detergent instead of harsh cleaning agents or sharp objects.

Examine the Connectors on the Wiring

Verify the electric sliding door opener's wiring connections on a regular basis to make sure the wiring is sturdy and free of rust or looseness. To avoid equipment failure due to inadequate contact, wiring terminals that are discovered to be loose or corroded should be tightened or replaced as soon as possible.

Examine the travel switch

The electric sliding door opener's travel switch is a crucial part, and the door body's ability to open and close is directly impacted by its precision. To guarantee the accuracy and dependability of the travel switch, its installation location and operational state should be routinely examined. The travel switch should be replaced or tightened as soon as possible if it is discovered to be loose or broken.

Make the rail system lubricated

The lubricating state of the rail system, one of the main parts of the electric sliding door opener, has a direct impact on the door body's noise level and smooth operation. Therefore, to keep the rail system well-lubricated, the right amount of lubricating oil should be injected on a regular basis.

Examine the motor's operation

Since the motor is the electric sliding door opener's driving mechanism, its performance has a direct impact on the equipment's entire functionality. Thus, it is important to routinely evaluate the motor's operating condition, taking into account factors like vibration, noise, and motor temperature. The motor should be stopped in time for inspection and troubleshooting if an abnormality is discovered.

Consistent upkeep of the control system

The controller and remote control are two parts of the electric sliding door opener's control system that need to be inspected and serviced on a regular basis. Verify that there are no unusual defects or alerts and that the control system operates normally. Contact qualified maintenance staff right away for prompt maintenance if the control system is discovered to be abnormal.

In Conclusion

Because of their great efficiency, dependability, safety, and intelligence, electric sliding door openers are frequently seen in contemporary structures. To maintain performance and increase their service life, regular maintenance is necessary. For the electric sliding door opener to operate steadily and for a long time, users must closely adhere to the maintenance guidelines. For prompt processing and consultation, please get in touch with qualified maintenance staff if you have any concerns or issues.

Hot Tags: electric sliding gate openers, China electric sliding gate openers manufacturers, suppliers, factory, Heavy Duty Commercial Gate Openers, automatic barrier systems, Swing Auto Gate System, Swing Gate Automation System, Heavy Duty Smart Gate Opener, Swing Gate Operator Automation System